AVIATOR - Preview

Your Resume

Resume Placeholder

Your Documents

Document Placeholder Other

USAJOBS Profile

Are you a U.S. Citizen or national?

Have you accepted a buyout from a Federal agency within the past 5 years?

Have you served in the U.S. Armed Forces?

Veterans' Preference:

Military Service Period Dates:

Geographic Preferences

Are you willing to work at the following duty location:

Washington - Des Moines

Applicant-Preferred Conditions of Employment and Federal Service

1. What is the lowest grade or payband that you wish to be considered for:

2a. Are you currently a permanent FAA employee?

2b. Are you currently a temporary FAA employee?

2c. Are you currently a temporary FAA employee serving under the Retired Military Air Traffic Controllers Program?

2d. Are you a DOT employee working in an agency other than the FAA and have completed a one year probationary period or trial period?

3. Are you a:

Former permanent employee of the FAA who had successfully completed a one-year probationary period OR
Current or former permanent civilian employee from other competitive or excepted service agencies who have completed a one-year probationary period or trial period in the competitive or excepted service.

4. Are you a preference eligible and/or veteran who was honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service?
Definitions of Preference Eligible and Active Service.

5. Do any of your relatives work for the agency or government organization to which you are submitting this application? (Include: father, mother, husband, wife, son, daughter, brother, sister, uncle, aunt, first cousin, nephew, niece, father-in-law, mother-in-law, son-in-law, daughter-in-law, brother-in-law, sister-in-law, stepfather, stepmother, stepson, stepdaughter, stepbrother, stepsister, half brother, and half sister.)

5a. If question #5 is yes, please provide the relative(s)' name, relationship, and department, agency, or branch of the Armed Forces for which your relative(s) works in the space below.

Basic Qualifications

1. Do you have a professional engineering degree? A "Yes" answer to this question requires that the degree must meet one of the following two criteria:

Be from a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology, or
Include differential and integral calculus and courses more advanced than first-year physics and chemistry in five of the following seven areas of engineering science or physics:
- Statics, dynamics,
- Strength of materials (stress-strain relationships),
- Fluid mechanics, hydraulics,
- Thermodynamics,
- Electrical fields and circuits,
- Nature and properties of materials (relating particle and aggregate structure to properties), and
- Any other comparable area of fundamental engineering science or physics such as optics, heat transfer, soil mechanics, or electronics

2. Do you have a combination of education and experience -- college-level education, training, and/or technical experience -- that furnished

A thorough knowledge of the physical and mathematical sciences underlying professional engineering, and
A good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

3. Are you currently registered as a professional engineer in any state, the District of Columbia, Guam, or Puerto Rico?

3a. If so, did you achieve this registration by means other than a test, for example, through state grandfather or eminence provisions?

3b. If you achieved this registration by means other than a test, please select the specialty field of your registration from the list to the right.

4. Have you passed the Engineer-in-Training (EIT) examination or the test required for professional registration which is administered by the Boards of Engineering Examiners in the various states, the District of Columbia, Guam, or Puerto Rico?

4a. If so, have you completed all the requirements for a bachelor's degree in engineering technology (BET) from an accredited college or university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences?

4b. If so, have you completed all the requirements for a bachelor's degree in engineering technology (BET) from a program accredited by the Accreditation Board for Engineering and Technology (ABET).

If you are qualifying based on a BET from an ABET program, please select the specialty field of your engineering technology program from the list to the right.

5. Have you successfully completed at least 60 semester hours of courses in the physical, mathematical, and engineering sciences which included differential and integral calculus and courses more advanced than first-year physics and chemistry in five of the following seven areas of engineering science or physics:

Statics, dynamics
Strength of materials (stress-strain relationships)
Fluid mechanics, hydraulics
Thermodynamics
Electrical fields and circuits
Nature and properties of materials (relating particle and aggregate structure to properties)
Any other comparable area of fundamental engineering science or physics such as optics, heat transfer, soil mechanics, or electronics.

NOTE: A "Yes" answer to this question requires that the courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET).

6. Have you successfully completed a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field (for example, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology)?

6a. If so, have you had (in addition to the degree) at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Grade Level Determination

Determine Academic Achievement - Please select all that apply.

1a. Was your professional engineering degree a 5-year program of study including at least 160 semester hours?

1b. Did you graduate in the upper third of your graduating class?

1c. Was your grade point average 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum?

1d. Was your grade point average 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in your major field or the required courses in the major field completed during the final 2 years of the curriculum.

1e. Were you elected to membership in a national scholastic honor society listed by Association of College Honor Societies? NOTE: Membership in a freshman honor society cannot be used to meet the requirements of this provision.

1f. Have you completed all the requirements of a Federal baccalaureate level student trainee program, including 1040 hours of work experience, 320 hours of which were at the GS-5 level?

Specialized Professional Engineering experience is experience with non-routine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

To be creditable, specialized experience must have been at a level of difficulty and responsibility equivalent to the next lower grade in the Federal Service.

2. Please select the one statement from the following list that best describes your level of specialized experience as it relates to this position for which you are applying.
Examples of various levels of specialized experience.

Not Answered
A. I have less than 1 year of specialized experience at any level.
B. I have at least 1 year of specialized experience at the GS-5 level (or equivalent in difficulty and responsibility to the GS-5 level in the Federal Service). The GS-5 is typically an entry-level trainee or developmental level, characterized by work on a limited range of assignments under close supervision.
C. I have at least 1 year of specialized experience at the GS-7 level (or equivalent in difficulty and responsibility to the GS-7 level in the Federal service). The GS-7 level is typically a junior level employee or advanced entry-level trainee. Work is less limited in scope than the GS-5, and is done more independently, but is still subject to close review and specific guidelines.
D. I have at least 1 year of specialized experience at the GS-9 level (or equivalent in difficulty and responsibility to the GS-9 level in the Federal Service). The GS-9 is generally no longer a trainee level; the scope of work is narrower, and the level of supervision is closer than for a full journeyman, but the employee has considerable latitude in planning and carrying out work.
E. I have at least 1 year of specialized experience at the GS-11 level (or equivalent in difficulty and responsibility to the GS-11 level in the Federal service). Work at the GS-11 typically involves a broad scope of responsibility, more variety, and less clear guidelines. Supervisory oversight generally consists of review of completed project to assure compliance with organization policies or regulations.
F. I have at least 1 year of specialized experience equivalent at the GS-12 (or equivalent in difficulty and responsibility to the GS-12 level in the Federal service). GS-12 is typically full journey level. It involves a wide range of assignments or a few highly complex assignments, and requires planning and organizing, setting priorities, and working without clear or specific guidelines. Work is typically reviewed only to assess impact on overall organizational objectives.
G. I have at least 1 year of specialized experience equivalent at the GS-13 (or equivalent in difficulty and responsibility to the GS-13 level in the Federal service). Work at the GS-13 level typically involves performing multiple, varying, and complex assignments requiring advanced knowledge of engineering principles and limited direction. Established guidelines exist, but require considerable discretion to select the most appropriate approach or recommend new approaches. Work is typically reviewed at major milestones and at completion for technical compliance and alignment with the requirements of the project.
H. I have at least 1 year of specialized experience equivalent at the GS-14 (or equivalent in difficulty and responsibility to the GS-14 level in the Federal service). GS-14 engineers typically plan and accomplish highly complex and challenging projects (often as the principal technical specialist) under the minimal direction of a manager or team leader. Assignments frequently cross organizational boundaries. Broad policies provide general direction, but discretion is used to develop new and innovative approaches. Work is reviewed through status reports and at project completion for technical compliance and alignment with project requirements and/or other work activity.

Knowledge, Skills and Abilities (KSA)

Please select the answer for the following knowledge, skills and abilities (KSAs) to indicate your possession of the KSA in terms of the position for which you are applying.
IMPORTANT: Ensure that your work experience supports your answer. Your answer and associated work experience will be evaluated further to validate whether the answer that you selected is appropriate.

1. Ability to apply engineering principles, aviation regulations and related policies, standards and procedures to type certification.

Select the response that best describes your level of expertise and independence using the above question as it relates to the position for which you are applying.

Not Answered
A. I have no experience in the use of this knowledge, skill, or ability.
B. I am developing in the use of this knowledge, skill, or ability and perform work involving it on an occasional basis with the direct guidance and supervision of a higher-level expert who reviews my work products and provides coaching and direction.
C. I am considered competent in the use of this knowledge, skill, or ability and have performed work involving it under the guidance and supervision of a higher-level expert reviewing work upon completion.
D. I am considered proficient in the use of this knowledge, skill, or ability and have performed work involving it on a regular and recurring basis and with only occasional higher-level review.
E. I am considered an expert in the use of this knowledge, skill, or ability and have provided training and instruction to others in the performance of work involving it.
F. I am considered an expert in the use of this knowledge, skill, or ability and have supervised others in the performance of work and accepting or rejecting their work using this skill or knowledge.

Knowledge, Skills and Abilities (KSA) 1 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

2. Knowledge of Federal Aviation Regulations (FARS) and related policies, standards and procedures concerning type certification.

Select the response that best describes your possession of the professional certification, which relates to the position for which you are applying.

Not Answered
A. I do not possess professional certification in this knowledge, skill, or ability area.
B. I possess professional certification in this knowledge, skill, or ability area issued by an accredited educational institution, a recognized professional association (e.g. the American Management Association), or a state, local, or federal governmental entity.

Knowledge, Skills and Abilities (KSA) 2 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

3. Skill in advising, directing and reviewing the work of others to achieve technical objectives.

Select the response that best describes your level of expertise and independence using the above question as it relates to the position for which you are applying.

Not Answered
A. I have no experience in the use of this knowledge, skill, or ability.
B. I am developing in the use of this knowledge, skill, or ability and perform work involving it on an occasional basis with the direct guidance and supervision of a higher-level expert who reviews my work products and provides coaching and direction.
C. I am considered competent in the use of this knowledge, skill, or ability and have performed work involving it under the guidance and supervision of a higher-level expert reviewing work upon completion.
D. I am considered proficient in the use of this knowledge, skill, or ability and have performed work involving it on a regular and recurring basis and with only occasional higher-level review.
E. I am considered an expert in the use of this knowledge, skill, or ability and have provided training and instruction to others in the performance of work involving it.
F. I am considered an expert in the use of this knowledge, skill, or ability and have supervised others in the performance of work and accepting or rejecting their work using this skill or knowledge.

Knowledge, Skills and Abilities (KSA) 3 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

4. Skill in preparing technical documents that compel others to take a course of action, instruct others in carrying out activities, or explain the purpose, goals, and objectives of a policy or regulations.

Select the response that best describes your level of expertise and independence using the above question as it relates to the position for which you are applying.

Not Answered
A. I have no experience in the use of this knowledge, skill, or ability.
B. I am developing in the use of this knowledge, skill, or ability and perform work involving it on an occasional basis with the direct guidance and supervision of a higher-level expert who reviews my work products and provides coaching and direction.
C. I am considered competent in the use of this knowledge, skill, or ability and have performed work involving it under the guidance and supervision of a higher-level expert reviewing work upon completion.
D. I am considered proficient in the use of this knowledge, skill, or ability and have performed work involving it on a regular and recurring basis and with only occasional higher-level review.
E. I am considered an expert in the use of this knowledge, skill, or ability and have provided training and instruction to others in the performance of work involving it.
F. I am considered an expert in the use of this knowledge, skill, or ability and have supervised others in the performance of work and accepting or rejecting their work using this skill or knowledge.

Knowledge, Skills and Abilities (KSA) 4 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

5. Skill in establishing and maintaining working relationships with multi-disciplinary subject matter experts, and in facilitating organizational consensus.

Select the response that best describes your level of expertise and independence using the above question as it relates to the position for which you are applying.

Not Answered
A. I have no experience in the use of this knowledge, skill, or ability.
B. I am developing in the use of this knowledge, skill, or ability and perform work involving it on an occasional basis with the direct guidance and supervision of a higher-level expert who reviews my work products and provides coaching and direction.
C. I am considered competent in the use of this knowledge, skill, or ability and have performed work involving it under the guidance and supervision of a higher-level expert reviewing work upon completion.
D. I am considered proficient in the use of this knowledge, skill, or ability and have performed work involving it on a regular and recurring basis and with only occasional higher-level review.
E. I am considered an expert in the use of this knowledge, skill, or ability and have provided training and instruction to others in the performance of work involving it.
F. I am considered an expert in the use of this knowledge, skill, or ability and have supervised others in the performance of work and accepting or rejecting their work using this skill or knowledge.

Knowledge, Skills and Abilities (KSA) 5 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

6. Skill planning and organizing programs and projects.

Select the response that best describes your level of expertise and independence using the above question as it relates to the position for which you are applying.

Not Answered
A. I have no experience in the use of this knowledge, skill, or ability.
B. I am developing in the use of this knowledge, skill, or ability and perform work involving it on an occasional basis with the direct guidance and supervision of a higher-level expert who reviews my work products and provides coaching and direction.
C. I am considered competent in the use of this knowledge, skill, or ability and have performed work involving it under the guidance and supervision of a higher-level expert reviewing work upon completion.
D. I am considered proficient in the use of this knowledge, skill, or ability and have performed work involving it on a regular and recurring basis and with only occasional higher-level review.
E. I am considered an expert in the use of this knowledge, skill, or ability and have provided training and instruction to others in the performance of work involving it.
F. I am considered an expert in the use of this knowledge, skill, or ability and have supervised others in the performance of work and accepting or rejecting their work using this skill or knowledge.

Knowledge, Skills and Abilities (KSA) 6 Narrative (optional): You may provide a narrative below that supports your answer or, in lieu of a narrative, ensure that the work experience contained within your application package fully supports your answer.

Preview Questionnaire

Your Resume

Your Documents

USAJOBS Profile

Geographic Preferences

Applicant-Preferred Conditions of Employment and Federal Service

Basic Qualifications

Grade Level Determination

Knowledge, Skills and Abilities (KSA)